Evolution-x-devices/kernel_oneplus_sm8550-devicetrees
2
0
Fork 0
mirror of https://github.com/Evolution-X-Devices/kernel_oneplus_sm8550-devicetrees synced 2026-02-01 09:49:52 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
ac8d73a4f2c1093b241e03271f0d2ba89733cbdf
kernel_oneplus_sm8550-devic…/qcom
History
Prashanth K ac8d73a4f2 ARM: dts: msm: Pull-up Wailua GPIO 7 to detect Vbus on cinder 
Vdet pin of NX5P1100 switch is goes high Vbus is supplied to it.
This DET pin is open drain PMOS output with default state low.
And its connected to GPIO 7 of Wailua which is used for detection
of vbus. Here we need to pull up GPIO 7, so that DET can go high
when Vbus is detected on NX5P switch.

Change-Id: I81298ffb779f90ba169c9ce9758b4cde9d1c0276
2022-07-07 20:06:04 +05:30
..
bengal-coresight.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
bengal-gdsc.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
bengal-pinctrl.dtsi
ARM: dts: msm: Enable ufs nodes for khaje
2022-05-30 11:05:54 +05:30
bengal-qupv3.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
bengal-regulator.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
bengal-thermal-overlay.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
bengal-thermal.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
cinder-coresight.dtsi
ARM: dts: msm: Correct the port number to hexadecimal digit
2022-06-25 05:11:56 -07:00
cinder-debug.dtsi
ARM: dts: msm: Add mem_dump and dcc nodes for cinder
2022-05-10 23:24:39 -07:00
cinder-du-idp.dts
ARM: dts: msm: Correct platform IDs on cinder IDPs
2022-06-29 15:18:10 -07:00
cinder-du-rumi.dts
ARM: dts: msm: Split cinder RUMI dt files into RU and DU variants
2022-06-13 13:14:20 -07:00
cinder-du-x100.dts
ARM: dts: msm: Add X100 variants for cinder SoC
2022-04-12 15:24:11 -07:00
cinder-du.dtsi
ARM: dts: msm: Update ssphy & hsphy on RU/DU DT files
2022-07-01 10:49:05 +05:30
cinder-idp-overlay.dts
ARM: dts: msm: Add initial device tree for cinder
2021-09-10 09:55:33 -07:00
cinder-idp.dtsi
ARM: dts: msm: Add eMMC support for cinder platforms
2022-06-06 09:50:50 +05:30
cinder-pinctrl.dtsi
ARM: dts: msm: Correct wrong function naming for GPIOs
2022-06-11 02:06:02 +05:30
cinder-pmic-overlay.dtsi
ARM: dts: msm: Pull-up Wailua GPIO 7 to detect Vbus on cinder
2022-07-07 20:06:04 +05:30
cinder-qupv3.dtsi
ARM: dts: msm: Update QUPV3 UART DTSI Entries for Cinder
2022-06-10 02:39:45 -07:00
cinder-regulators.dtsi
ARM: dts: qcom: Add RPMh controlled PMIC regulators for cinder
2022-04-08 22:52:37 +05:30
cinder-ru-idp.dts
ARM: dts: msm: Correct platform IDs on cinder IDPs
2022-06-29 15:18:10 -07:00
cinder-ru-rumi.dts
ARM: dts: msm: Split cinder RUMI dt files into RU and DU variants
2022-06-13 13:14:20 -07:00
cinder-ru.dtsi
ARM: dts: msm: Update ssphy & hsphy on RU/DU DT files
2022-07-01 10:49:05 +05:30
cinder-rumi-overlay.dts
ARM: dts: msm: Add initial device tree for cinder
2021-09-10 09:55:33 -07:00
cinder-rumi.dtsi
ARM: dts: msm: increase swiotlb buffer size
2022-06-02 14:18:59 -07:00
cinder-stub-regulator.dtsi
ARM: dts: msm: Add stub regulators for cinder
2021-12-14 17:44:47 +05:30
cinder-thermal.dtsi
ARM: dts: qcom: Enable TSENS driver for cinder
2022-03-04 09:09:52 +05:30
cinder-usb.dtsi
ARM: dts: msm: Add QMP PHY node for Cinder
2022-05-30 00:05:36 -07:00
cinder-x100.dtsi
ARM: dts: msm: Add X100 variants for cinder SoC
2022-04-12 15:24:11 -07:00
cinder.dts
ARM: dts: msm: Add initial device tree for cinder
2021-09-10 09:55:33 -07:00
cinder.dtsi
ARM: dts: msm: Update xo_board clock frequency for CINDER
2022-07-01 12:10:28 +05:30
ipcc-test-sdxpinn.dtsi
ARM: dts: qcom: Include IPCC test node for sdxpinn
2022-06-22 19:54:35 +05:30
ipcc-test.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
kaka-rumi.dts
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
kaka-rumi.dtsi
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
kaka-stub-regulator.dtsi
ARM: dts: msm: Add stub regulators for kaka
2022-05-11 10:39:16 +05:30
kaka.dts
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
kaka.dtsi
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
kalama-atp-overlay.dts
ARM: dts: msm: Add support for v2 on Kalama SoC
2022-03-25 08:53:52 -07:00
kalama-atp.dtsi
ARM: dts: msm: Add ATP platform support for Kalama SoC
2022-01-20 11:12:39 -08:00
kalama-cdp-nfc-overlay.dts
ARM: dts: msm: Add support for NFC board for kalama
2022-05-20 14:06:06 -07:00
kalama-cdp-nfc.dtsi
ARM: dts: msm: Add support for NFC board for kalama
2022-05-20 14:06:06 -07:00
kalama-cdp-overlay.dts
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalama-cdp-wsa883x-overlay.dts
ARM: dts: msm: Add platform support for wsa883x audio chip
2022-03-21 20:59:39 -07:00
kalama-cdp-wsa883x.dtsi
ARM: dts: msm: Add platform support for wsa883x audio chip
2022-03-21 20:59:39 -07:00
kalama-cdp.dtsi
ARM: dts: msm: Enable SD card smmu fastmap for kalama platforms
2022-06-13 20:09:33 -07:00
kalama-coresight.dtsi
ARM: dts: msm: Update device tree for coresight on kalama
2022-06-20 17:30:20 +08:00
kalama-debug.dtsi
ARM: dts: msm: Add the length of registers to be read
2022-05-06 09:00:17 +08:00
kalama-dma-heaps.dtsi
ARM: dts: msm: Add CMA instead of carveout for secure dsp usecase
2022-06-09 10:24:59 +05:30
kalama-eva.dtsi
ARM: dts: msm: Add EVA device tree for Kalama
2021-10-11 11:50:09 -07:00
kalama-mtp-nfc-overlay.dts
ARM: dts: msm: Add support for v2 on Kalama SoC
2022-03-25 08:53:52 -07:00
kalama-mtp-nfc.dtsi
ARM: dts: msm: Add support for NFC board for kalama
2022-02-02 07:23:53 -08:00
kalama-mtp-overlay.dts
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalama-mtp.dtsi
ARM: dts: msm: Enable SD card smmu fastmap for kalama platforms
2022-06-13 20:09:33 -07:00
kalama-oemvm-cdp.dts
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-cdp.dtsi
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-mtp.dts
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-mtp.dtsi
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-qrd.dts
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-qrd.dtsi
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-rumi.dts
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-rumi.dtsi
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm.dtsi
ARM: dts: msm: Add support to load OEMVM from CMA On Kalama
2022-06-10 05:54:47 -07:00
kalama-pcie.dtsi
ARM: dts: msm: Add block control reset to recover from SBR
2022-06-14 23:36:58 -07:00
kalama-pinctrl.dtsi
ARM: dts: msm: change PIN func of qup2_se0 per pinctrl driver
2022-05-22 22:27:24 -07:00
kalama-pmic-overlay.dtsi
Merge "ARM: dts: msm: add regulator OCP notifier device for Kalama"
2022-05-03 08:42:19 -07:00
kalama-qrd-overlay.dts
Merge "ARM: dts: msm: Add support for Kalama v2"
2022-02-02 20:23:27 -08:00
kalama-qrd.dtsi
ARM: dts: msm: Update pre-emphasis and HS disconnect threshold value
2022-06-24 14:48:12 -07:00
kalama-qupv3.dtsi
ARM: dts: msm: LA: add support for multi touch
2022-03-27 04:28:23 -07:00
kalama-rcm-overlay.dts
ARM: dts: msm: Add RCM platform support for Kalama SoC
2022-02-10 15:23:50 -08:00
kalama-rcm.dtsi
ARM: dts: msm: add touch driver nodes for Kalama RCM
2022-02-24 16:35:07 -08:00
kalama-regulators.dtsi
ARM: dts: qcom: update RPMh regulator L16B voltage settings for Kalama
2022-03-03 11:14:01 -08:00
kalama-rumi-overlay.dts
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalama-rumi.dtsi
Merge "ARM: dts: qcom: Enable CPU cooling device for kalama"
2022-01-25 21:00:42 -08:00
kalama-thermal-modem.dtsi
ARM: dts: msm: Add correct thermal zones for sdr pa sensors
2022-06-22 18:01:08 +05:30
kalama-thermal-overlay.dtsi
ARM: dts: qcom: enable modem mitigation for bcl thermal zones for kalama
2022-05-13 17:46:55 +05:30
kalama-thermal.dtsi
ARM: dts: qcom: Add hotplug mitigation for cpu TSENS thermal zones
2022-07-01 00:45:24 +05:30
kalama-usb.dtsi
ARM: dts: msm: Enable u1u2 functionality with USB host mode on Kalama
2022-06-10 15:01:18 -07:00
kalama-v2.dts
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalama-v2.dtsi
ARM: dts: msm: Update the LLCC frequency table
2022-06-14 10:58:50 -07:00
kalama-vm-cdp.dts
ARM: dts: qcom: Adding board support for CDP,MTP,QRD for Kalama VM
2021-10-29 22:43:49 -07:00
kalama-vm-cdp.dtsi
ARM: dts: msm: add trusted support for SPI on kalama
2022-04-18 16:53:40 -07:00
kalama-vm-dma-heaps.dtsi
ARM: dts: msm: Use TUI_CARVEOUT_HEAP on kalama-vm
2022-06-29 16:59:01 -07:00
kalama-vm-mtp.dts
ARM: dts: qcom: Adding board support for CDP,MTP,QRD for Kalama VM
2021-10-29 22:43:49 -07:00
kalama-vm-mtp.dtsi
ARM: dts: msm: add trusted touch properties for kalama
2022-03-30 19:11:15 -07:00
kalama-vm-qrd.dts
ARM: dts: qcom: Adding board support for CDP,MTP,QRD for Kalama VM
2021-10-29 22:43:49 -07:00
kalama-vm-qrd.dtsi
ARM: dts: msm: add trusted support for QRD on kalama
2022-05-02 17:53:50 -07:00
kalama-vm-rumi.dts
ARM: dts: msm: Adding base vm dt for kalama and support for rumi platform
2021-10-22 09:35:54 +05:30
kalama-vm-rumi.dtsi
ARM: dts: msm: Adding base vm dt for kalama and support for rumi platform
2021-10-22 09:35:54 +05:30
kalama-vm.dtsi
ARM: dts: msm: Online memory blocks as movable by default
2022-07-01 18:52:13 -07:00
kalama.dts
ARM: dts: msm: Add initial device tree for kalama
2021-06-01 22:52:08 -07:00
kalama.dtsi
Merge "ARM: dts: msm: Online memory blocks as movable by default"
2022-07-06 15:15:43 -07:00
kalamap-v2.dts
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalamap-v2.dtsi
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalamap.dts
ARM: dts: msm: Add device trees for KalamaP SoC
2021-09-15 11:52:10 -07:00
kalamap.dtsi
ARM: dts: msm: Add device trees for KalamaP SoC
2021-09-15 11:52:10 -07:00
khaje-atp-overlay.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-atp.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-atp.dtsi
ARM: dts: msm: Enable ufs nodes for khaje
2022-05-30 11:05:54 +05:30
khaje-dma-heaps.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp-nopmi-overlay.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp-nopmi.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp-nopmi.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp-overlay.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp-pm7250b.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
khaje-idp.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp.dtsi
ARM: dts: msm: Enable ufs nodes for khaje
2022-05-30 11:05:54 +05:30
khaje-idps-display-90hz-overlay.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idps-display-90hz.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idps-display-90hz.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-pinctrl.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-pm7250b.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
khaje-qrd-hvdcp3p5-overlay.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-hvdcp3p5.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-hvdcp3p5.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nopmi-overlay.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nopmi.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nopmi.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nowcd9375-overlay.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nowcd9375.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nowcd9375.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-pm7250b.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd.dtsi
ARM: dts: msm: Enable ufs nodes for khaje
2022-05-30 11:05:54 +05:30
khaje-regulator.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-thermal-pm7250b-overlay.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-usb.dtsi
ARM: dts: msm: Remove core-voltage-level for khaje
2022-06-08 12:33:53 +05:30
khaje.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje.dtsi
ARM: dts: msm: Update video fw size for Khaje
2022-06-28 12:40:27 +05:30
Makefile
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
msm-arm-smmu-bengal.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
msm-arm-smmu-cinder.dtsi
ARM: dts: msm: Disable micro-idle on cinder
2022-05-25 19:52:13 -07:00
msm-arm-smmu-kalama-vm.dtsi
ARM: dts: msm: Update the ACTLR settings for Kalama's VM's IOMMU clients
2022-01-04 15:52:47 -08:00
msm-arm-smmu-kalama.dtsi
ARM: dts: msm: Add handoff-smr for cont splash
2022-02-18 10:11:52 +05:30
msm-arm-smmu-sdmshrike.dtsi
ARM: dts: msm: Add ARM SMMU devices for SDMSHRIKE
2022-06-22 09:17:54 +05:30
msm-arm-smmu-sm8150-v2.dtsi
ARM: dts: msm: Add ARM SMMU devices for SM8150
2022-03-22 12:08:07 +05:30
msm-arm-smmu-sm8150.dtsi
ARM: dts: msm: Add ARM SMMU devices for SM8150
2022-03-22 12:08:07 +05:30
msm-arm-smmu-waipio-vm.dtsi
ARM: dts: msm: remove execute permissions for dt files
2021-08-23 11:07:07 -07:00
msm-arm-smmu-waipio.dtsi
ARM: dts: msm: Remove SMR and CB override values for Waipio's IOMMUs
2021-12-28 13:03:30 -08:00
msm-rdbg.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm6125-rpm-regulator.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
pm6125.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
pm7250b.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
pm8008.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
pm8150.dtsi
ARM: dts: msm: Add thermal zone entries for pm8195
2022-06-27 17:16:44 +05:30
pm8195.dtsi
ARM: dts: msm: remove interrupt property for vadc in pm8195
2022-06-27 16:27:39 +05:30
pm8350.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm8350b.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm8350c.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm8450.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm8550.dtsi
ARM: dts: qcom: Update temp-alarm device names for kalama PMICs
2022-03-04 17:12:18 -08:00
pm8550b.dtsi
ARM: dts: qcom: Update temp-alarm device names for kalama PMICs
2022-03-04 17:12:18 -08:00
pm8550ve.dtsi
ARM: dts: qcom: enable different pmic temp alarm mitigation for kalama
2022-03-09 23:49:32 +05:30
pm8550vs.dtsi
ARM: dts: qcom: Update temp-alarm device names for kalama PMICs
2022-03-04 17:12:18 -08:00
pmk8350.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pmk8550.dtsi
ARM: dts: msm: add regulator OCP notifier device for Kalama
2022-04-15 17:45:34 -07:00
pmr735a.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pmr735b.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pmr735d.dtsi
ARM: dts: qcom: Update temp-alarm device names for kalama PMICs
2022-03-04 17:12:18 -08:00
qg-batterydata-alium-3600mah.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
qg-batterydata-atl466271_3300mAh.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
sa410m-rumi.dts
ARM: dts: msm: Add Initial device tree for SA410M RUMI
2022-06-14 21:47:53 -07:00
sa410m-rumi.dtsi
ARM: dts: msm: Add Initial device tree for SA410M RUMI
2022-06-14 21:47:53 -07:00
sa410m.dtsi
ARM: dts: msm: Add Initial device tree for SA410M RUMI
2022-06-14 21:47:53 -07:00
sa525m-rumi.dts
ARM: dts: msm: Add dt for sa525m-rumi
2022-05-26 01:02:31 -07:00
sa525m.dtsi
ARM: dts: msm: Add dt for sa525m-rumi
2022-05-26 01:02:31 -07:00
sa6155-adp-air-overlay.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155-adp-common.dtsi
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155-adp-star-overlay.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155.dtsi
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155p-adp-air-overlay.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155p-adp-star-overlay.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155p.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155p.dtsi
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa8155-adp-air-overlay.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155-adp-common.dtsi
Merge "ARM: dts: msm: remove BT power node for sa81x5"
2022-06-28 17:03:06 -07:00
sa8155-adp-star-overlay.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155-adp-star.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155-pmic-overlay.dtsi
ARM: dts: msm: Add thermal zone entries for pm8195
2022-06-27 17:16:44 +05:30
sa8155-regulator.dtsi
ARM: dts: msm: Add regulators for sa8155
2022-02-02 17:52:27 +05:30
sa8155-v1.dtsi
ARM: dts: msm: Add clock controller and gdsc nodes for sm8150
2022-03-08 09:27:33 +05:30
sa8155-v2.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155-v2.dtsi
ARM: dts: msm: Add PCIe configuration for SM8150
2022-03-24 21:54:17 +05:30
sa8155.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155.dtsi
ARM: dts: msm: Enable uefi_log memory for SA8155
2022-06-02 16:23:46 +05:30
sa8155p-adp-air-overlay.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155p-adp-star-overlay.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155p-v2.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155p-v2.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155p.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155p.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8195-gdsc.dtsi
ARM: dts: msm: Add all clock controller and gdsc nodes for sc8180x
2022-06-21 11:44:24 +05:30
sa8195-pmic.dtsi
ARM: dts: msm: Add thermal zone entries for pm8195
2022-06-27 17:16:44 +05:30
sa8195-regulator.dtsi
ARM: dts: msm: Add regulators for SDMSHRIKE
2022-05-23 07:33:30 +05:30
sa8195p-adp-air-overlay.dts
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-adp-air.dtsi
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-adp-common.dtsi
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-adp-star-overlay.dts
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-adp-star.dtsi
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-pcie.dtsi
ARM: dts: msm: Add PCIe devicetree nodes for sa8195
2022-06-27 16:23:13 +05:30
sa8195p-regulator.dtsi
ARM: dts: msm: Update protected-clocks and compatible string for SC8180X
2022-06-24 10:01:11 +05:30
sa8195p.dts
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p.dtsi
ARM: dts: msm: Add PCIe devicetree nodes for sa8195
2022-06-27 16:23:13 +05:30
sdmshrike-debug.dtsi
ARM: dts: msm: Add memory dump nodes for SDMSHRIKE
2022-06-24 11:25:32 +05:30
sdmshrike-dma-heaps.dtsi
ARM: dts: msm: Add the dma-buf heaps device node for SDMSHRIKE
2022-06-22 09:19:09 +05:30
sdmshrike-pinctrl.dtsi
ARM: dts: msm: Add PDC as wakeup parent to TLMM for sdmshrike
2022-04-25 14:20:54 +05:30
sdmshrike-v2.dtsi
ARM: dts: msm: Add all clock controller and gdsc nodes for sc8180x
2022-06-21 11:44:24 +05:30
sdmshrike.dtsi
ARM: dts: qcom: Add CDSP remoteproc in SDMSHRIKE
2022-06-30 13:19:42 +05:30
sdxlemur-external-soc.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
sdxpinn-pinctrl.dtsi
ARM: dts: msm: Add QUPv3 UART console node for sdxpinn
2022-06-28 11:01:05 +05:30
sdxpinn-qupv3.dtsi
ARM: dts: msm: Add QUPv3 UART console node for sdxpinn
2022-06-28 11:01:05 +05:30
sdxpinn-regulators.dtsi
ARM: dts: qcom: add stub regulator devices for sdxpinn
2022-05-17 14:55:50 -07:00
sdxpinn-reserved-memory.dtsi
ARM: dts: msm: add initial memory map for sdxpinn
2022-06-01 17:15:17 +05:30
sdxpinn-rumi.dts
ARM: dts: msm: Add initial device tree for sdxpinn target
2022-05-17 15:38:53 +05:30
sdxpinn-rumi.dtsi
ARM: dts: msm: Add QUPv3 UART console node for sdxpinn
2022-06-28 11:01:05 +05:30
sdxpinn.dts
ARM: dts: msm: Add initial device tree for sdxpinn target
2022-05-17 15:38:53 +05:30
sdxpinn.dtsi
ARM: dts: msm: Add QUPv3 UART console node for sdxpinn
2022-06-28 11:01:05 +05:30
sm6150-pinctrl.dtsi
ARM: dts: msm: Add pinctrl for TLMM on SM6150
2022-03-31 02:09:25 -07:00
sm6150.dtsi
ARM: dts: msm: Add idle states and soc sleep stats for sm6150
2022-04-06 21:57:47 -07:00
sm6150p.dtsi
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sm8150-debug.dtsi
ARM: dts: msm: Add memory dump nodes for SM8150
2022-04-28 11:23:20 +05:30
sm8150-dma-heaps.dtsi
ARM: dts: msm: Add the dma-buf heaps device node for sm8150
2022-02-16 23:44:43 -08:00
sm8150-gdsc.dtsi
ARM: dts: msm: Add clock controller and gdsc nodes for sm8150
2022-03-08 09:27:33 +05:30
sm8150-pcie.dtsi
ARM: dts: msm: Add PCIe configuration for SM8150
2022-03-24 21:54:17 +05:30
sm8150-pinctrl.dtsi
ARM: dts: msm: Add pinctrl property for 4W UART node
2022-06-02 14:32:34 +05:30
sm8150-qupv3.dtsi
ARM: dts: msm: Add pinctrl property for 4W UART node
2022-06-02 14:32:34 +05:30
sm8150-regulator.dtsi
ARM: dts: msm: Add regulators for sa8155
2022-02-02 17:52:27 +05:30
sm8150-slpi-pinctrl.dtsi
ARM: dts: msm: Add SLPI pinctrl for SM8150
2022-04-05 01:26:46 -07:00
sm8150-smp2p.dtsi
ARM: dts: msm: Add Mproc nodes support on SM8150
2022-03-24 05:13:23 -07:00
sm8150-ssc-qupv3.dtsi
ARM: dts: msm: Add QUP node entries for SM8150
2022-04-06 23:05:50 -07:00
sm8150-usb.dtsi
ARM: dts: msm: Add support for both primary and secondary ports on SA8155
2022-04-25 17:22:14 +05:30
sm8150-v2.dtsi
ARM: dts: msm: Add PCIe configuration for SM8150
2022-03-24 21:54:17 +05:30
sm8150.dtsi
ARM: dts: msm: Disable LPM for UFS in SA8155
2022-07-01 13:28:30 +05:30
sm8150p-v2.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sm8150p.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
smb1355.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
smb1394.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
waipio-atp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-atp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-atp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-atp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-atp.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-coresight.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-debug.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-dma-heaps.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-eva.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-gpu.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-hdk.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-kiwi-mtp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-kiwi-mtp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur-cdp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur-cdp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur-mtp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur-mtp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur.dtsi
ARM: dts: msm: Add gen speed mismatch panic boolean for waipio-lemur
2022-03-23 11:43:35 -07:00
waipio-mtp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-mtp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-mtp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-mtp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-mtp.dtsi
ARM: dts: msm: Remove ucsi port related remote-endpoint with USB on waipio
2021-08-30 14:51:43 -07:00
waipio-oemvm-cdp.dts
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-cdp.dtsi
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-mtp.dts
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-mtp.dtsi
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-qrd.dts
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-qrd.dtsi
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-rumi.dts
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-rumi.dtsi
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm.dtsi
ARM: dts: qcom: Add disk emulation support for kalama and WKP
2022-02-03 21:29:48 -08:00
waipio-pcie.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-pinctrl.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-pm8008.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-pm8010-i2c.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-pm8010-spmi.dtsi
ARM: dts: msm: Update apps and display RSC to support multi DRV for waipio
2021-11-15 13:02:20 +05:30
waipio-pmic-overlay.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-2s.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8010-2s-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8010-2s.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qupv3.dtsi
ARM: dts: msm: Enable QUPv3 console node for upstream driver
2021-08-26 10:50:15 +05:30
waipio-regulators.dtsi
ARM: dts: msm: Update apps and display RSC to support multi DRV for waipio
2021-11-15 13:02:20 +05:30
waipio-rumi-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-rumi.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-rumi.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-smp2p.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-thermal-modem.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-thermal-overlay.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-thermal.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-usb.dtsi
ARM: dts: msm: Remove qcom,dwc-usb3-msm-tx-fifo-size property
2022-01-21 18:42:59 +05:30
waipio-v2-atp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-atp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-cdp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-cdp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-gpu.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-mtp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-mtp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-qrd-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-qrd-pm8010-2s.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-qrd-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2.dtsi
ARM: dts: msm: Update wkp memlat device nodes
2021-12-15 09:27:49 -08:00
waipio-vm-cdp.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-cdp.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-dma-heaps.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-mtp.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-mtp.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-qrd.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-qrd.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-rumi.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-rumi.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm.dtsi
ARM: dts: qcom: Add persist disk support
2022-03-01 07:04:57 +05:30
waipio.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio.dtsi
ARM: dts: qcom: Add persist disk support
2022-03-01 07:04:57 +05:30
waipiop-cdp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-cdp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-hdk-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-hdk-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-mtp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-mtp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-qrd-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-qrd-pm8010-2s.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-qrd-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-cdp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-cdp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-hdk-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-mtp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-mtp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-qrd-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-qrd-pm8010-2s.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-qrd-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00