Evolution-x-devices/kernel_oneplus_sm8550-devicetrees
2
0
Fork 0
mirror of https://github.com/Evolution-X-Devices/kernel_oneplus_sm8550-devicetrees synced 2026-02-01 09:04:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
10faed24bb417291d22b572fa34a2351c98faa22
kernel_oneplus_sm8550-devic…/qcom
History
Tengfei Fan 10faed24bb ARM: dts: msm: Add kalama APQ msm-id to esoc overlays 
This change adds support for kalama APQs for the esoc boards.

Change-Id: I8b12adc63f29c54d015ded624b274f12a506a210
2022-10-19 17:55:53 -07:00
..
bengal-coresight.dtsi
ARM: dts: msm: Add in-port, out-port node changes
2022-10-11 17:32:30 +05:30
bengal-gdsc.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
bengal-pinctrl.dtsi
ARM: dts: msm: Group SDC PIN for Bengal
2022-09-21 17:23:44 +05:30
bengal-qupv3.dtsi
ARM: dts: msm: Update UART configuration for Khaje
2022-09-13 16:02:08 +05:30
bengal-regulator.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
bengal-thermal-overlay.dtsi
ARM: dts: qcom: Add thermal devicetree support for khaje
2022-08-28 23:20:58 -07:00
bengal-thermal.dtsi
ARM: dts: qcom: Enable quiet-therm thermalzone for khaje
2022-10-12 05:09:00 -07:00
cinder-coresight.dtsi
ARM: dts: msm: Add gladiator source for cinder
2022-09-21 17:15:50 +08:00
cinder-debug.dtsi
ARM: dts: msm: Enable DCC for Cinder
2022-07-13 01:31:10 -07:00
cinder-dma-heaps.dtsi
ARM: dts: msm: Add dtsi changes for qseecom heap
2022-08-11 14:26:35 +05:30
cinder-du-idp.dts
ARM: dts: msm: Correct platform IDs on cinder IDPs
2022-06-29 15:18:10 -07:00
cinder-du-rumi.dts
ARM: dts: msm: Split cinder RUMI dt files into RU and DU variants
2022-06-13 13:14:20 -07:00
cinder-du-x100.dts
ARM: dts: msm: Add X100 variants for cinder SoC
2022-04-12 15:24:11 -07:00
cinder-du.dtsi
ARM: dts: msm: Update memory map for mpss and mpss dt region
2022-08-09 13:48:55 -07:00
cinder-idp-overlay.dts
ARM: dts: msm: Add initial device tree for cinder
2021-09-10 09:55:33 -07:00
cinder-idp.dtsi
ARM: dts: msm: Disable SMBus IO expander on cinder
2022-09-07 09:32:42 -07:00
cinder-pinctrl.dtsi
ARM: dts: msm: Add i2c slave dtsi node
2022-09-05 11:19:53 +05:30
cinder-pmic-overlay.dtsi
Merge "ARM: dts: msm: Pull-up Wailua GPIO 7 to detect Vbus on cinder"
2022-07-13 04:05:04 -07:00
cinder-qupv3.dtsi
ARM: dts: msm: Update UART gpio drive strength and gpio control mode for Time Sync
2022-07-18 16:38:22 +03:00
cinder-regulators.dtsi
ARM: dts: msm: Update PMIC_ARB address and ADC_TM for CINDER
2022-07-06 18:15:21 +05:30
cinder-ru-idp-2gb.dts
ARM: dts: msm: Add device tree for 2gb cinder ru idp
2022-08-25 04:54:57 -07:00
cinder-ru-idp.dts
ARM: dts: qcom: Update the ddr size for 4GB cinder ru
2022-10-10 18:04:45 +05:30
cinder-ru-rumi.dts
ARM: dts: msm: Split cinder RUMI dt files into RU and DU variants
2022-06-13 13:14:20 -07:00
cinder-ru.dtsi
ARM: dts: msm: Update memory map for mpss and mpss dt region
2022-08-09 13:48:55 -07:00
cinder-rumi-overlay.dts
ARM: dts: msm: Add initial device tree for cinder
2021-09-10 09:55:33 -07:00
cinder-rumi.dtsi
ARM: dts: msm: Add support for PCIe virtual functions
2022-07-13 08:43:50 -07:00
cinder-stub-regulator.dtsi
ARM: dts: msm: Add stub regulators for cinder
2021-12-14 17:44:47 +05:30
cinder-thermal.dtsi
ARM: dts: qcom: Add VIRTUAL SENSOR based thermal zones
2022-10-17 22:13:53 +05:30
cinder-usb.dtsi
ARM: dts: msm: Use the 5nm QMP USB UNI PHY header for cinder
2022-10-08 09:10:20 -07:00
cinder-v2-du-idp.dts
ARM: dts: msm: Add cinder v2 device trees
2022-08-18 11:58:59 -07:00
cinder-v2-du-x100.dts
ARM: dts: msm: Add cinder v2 device trees
2022-08-18 11:58:59 -07:00
cinder-v2-du.dtsi
ARM: dts: msm: Add cinder v2 device trees
2022-08-18 11:58:59 -07:00
cinder-v2-idp.dtsi
ARM: dts: msm: Add cinder v2 device trees
2022-08-18 11:58:59 -07:00
cinder-v2-ru-idp-2gb.dts
ARM: dts: msm: Add device tree for 2gb cinder ru idp
2022-08-25 04:54:57 -07:00
cinder-v2-ru-idp.dts
ARM: dts: msm: Add cinder v2 device trees
2022-08-18 11:58:59 -07:00
cinder-v2-ru.dtsi
ARM: dts: msm: Add cinder v2 device trees
2022-08-18 11:58:59 -07:00
cinder-v2-x100.dtsi
ARM: dts: msm: Add cinder v2 device trees
2022-08-18 11:58:59 -07:00
cinder-v2.dtsi
ARM: dts: msm: Add cinder v2 device trees
2022-08-18 11:58:59 -07:00
cinder-x100.dtsi
ARM: dts: msm: Disable SMBus IO expander on cinder
2022-09-07 09:32:42 -07:00
cinder.dts
ARM: dts: msm: Add initial device tree for cinder
2021-09-10 09:55:33 -07:00
cinder.dtsi
Merge "ARM: dts: msm: Enable i2c se4 device node"
2022-10-19 06:38:40 -07:00
direwolf-vm-lv-overlay.dts
ARM: dts: msm: Add direwolf dts files for lvgvm
2022-10-12 03:55:57 -07:00
direwolf-vm-lv.dts
ARM: dts: msm: Add direwolf dts files for lvgvm
2022-10-12 03:55:57 -07:00
direwolf-vm-lv.dtsi
ARM: dts: msm: Add direwolf dts files for lvgvm
2022-10-12 03:55:57 -07:00
direwolf-vm.dtsi
ARM: dts: msm: Add direwolf dts files for lvgvm
2022-10-12 03:55:57 -07:00
ipcc-test-cinder.dtsi
ARM: dts: msm: Add ipcc test to cinder SoC
2022-07-27 16:14:53 -07:00
ipcc-test-sdxpinn.dtsi
ARM: dts: qcom: Include IPCC test node for sdxpinn
2022-06-22 19:54:35 +05:30
ipcc-test.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
kaka-rumi.dts
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
kaka-rumi.dtsi
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
kaka-stub-regulator.dtsi
ARM: dts: msm: Add stub regulators for kaka
2022-05-11 10:39:16 +05:30
kaka.dts
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
kaka.dtsi
ARM: dts: msm: Add initial device tree for Kaka
2022-06-27 18:18:58 +05:30
kalama-atp-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-atp.dtsi
ARM: dts: msm: Add ATP platform support for Kalama SoC
2022-01-20 11:12:39 -08:00
kalama-cdp-nfc-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-cdp-nfc.dtsi
ARM: dts: msm: Add support for NFC board for kalama
2022-05-20 14:06:06 -07:00
kalama-cdp-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-cdp-wsa883x-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-cdp-wsa883x.dtsi
ARM: dts: msm: Add platform support for wsa883x audio chip
2022-03-21 20:59:39 -07:00
kalama-cdp.dtsi
ARM: dts: msm: add TUI support on secondary touch
2022-08-02 14:59:24 -07:00
kalama-coresight.dtsi
ARM: dts: msm: Update device tree for coresight on kalama
2022-06-20 17:30:20 +08:00
kalama-debug.dtsi
ARM: dts: msm: Update DCC configuration to device tree on kalama
2022-07-28 19:37:56 -07:00
kalama-dma-heaps.dtsi
ARM: dts: msm: Add CMA instead of carveout for secure dsp usecase
2022-06-09 10:24:59 +05:30
kalama-eva.dtsi
ARM: dts: msm: Add EVA device tree for Kalama
2021-10-11 11:50:09 -07:00
kalama-mtp-nfc-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-mtp-nfc.dtsi
ARM: dts: msm: Add support for NFC board for kalama
2022-02-02 07:23:53 -08:00
kalama-mtp-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-mtp.dtsi
ARM: dts: qcom: move regulator-ocp-notifier supply properties for Kalama
2022-07-01 17:46:05 -07:00
kalama-oemvm-cdp.dts
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-cdp.dtsi
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-mtp.dts
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-mtp.dtsi
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-qrd.dts
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-qrd.dtsi
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-rumi.dts
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm-rumi.dtsi
ARM: dts: qcom: Add oemvm support to kalama
2022-02-02 08:32:08 +05:30
kalama-oemvm.dtsi
Merge "ARM: dts: qcom: Add msgq for vcpu scheduler test"
2022-08-01 16:50:35 -07:00
kalama-pcie.dtsi
ARM: dts: msm: Update phy sequence to v1.01 on kalama
2022-08-11 18:22:03 -07:00
kalama-pinctrl.dtsi
ARM: dts: msm: Add initial support for kalama+sdxpinn
2022-09-19 13:35:56 +08:00
kalama-pinn-cdp-overlay.dts
ARM: dts: msm: Add kalama APQ msm-id to esoc overlays
2022-10-19 17:55:53 -07:00
kalama-pinn-mtp-overlay.dts
ARM: dts: msm: Add kalama APQ msm-id to esoc overlays
2022-10-19 17:55:53 -07:00
kalama-pinn.dtsi
ARM: dts: msm: Add initial pcie1 node for kalama-pinn
2022-09-23 13:01:52 -07:00
kalama-pmic-overlay.dtsi
Merge "ARM: dts: qcom: Update trip point 1 setting for Kalama PMICs"
2022-08-17 02:37:10 -07:00
kalama-qrd-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-qrd.dtsi
ARM: dts: qcom: move regulator-ocp-notifier supply properties for Kalama
2022-07-01 17:46:05 -07:00
kalama-qupv3.dtsi
ARM: dts: msm: add rtl based flag for kalama
2022-07-27 04:30:15 -07:00
kalama-rcm-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-rcm.dtsi
ARM: dts: msm: add touch type for goodix driver
2022-08-12 14:41:53 -07:00
kalama-regulators.dtsi
ARM: dts: qcom: update RPMh regulator S2G max voltage for Kalama
2022-09-13 10:45:06 -07:00
kalama-rumi-overlay.dts
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalama-rumi.dtsi
Merge "ARM: dts: qcom: Enable CPU cooling device for kalama"
2022-01-25 21:00:42 -08:00
kalama-sg-hhg-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-sg-hhg.dtsi
ARM: dts: qcom: Add fan thermal mitigation rules on Kalama HHG
2022-09-21 16:29:02 +08:00
kalama-sg.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-sg.dtsi
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalama-thermal-modem.dtsi
ARM: dts: msm: Add correct thermal zones for sdr pa sensors
2022-06-22 18:01:08 +05:30
kalama-thermal-overlay.dtsi
ARM: dts: qcom: enable modem mitigation for bcl thermal zones for kalama
2022-05-13 17:46:55 +05:30
kalama-thermal.dtsi
ARM: dts: msm: Update node name of tsens for kalama
2022-09-26 20:21:53 +08:00
kalama-usb.dtsi
ARM: dts: msm: Remove delay from QMP phy init sequence
2022-08-10 15:14:21 -07:00
kalama-v2.dts
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalama-v2.dtsi
ARM: dts: msm: Add DDRQOS prime table for kalama v2
2022-08-04 11:01:49 -07:00
kalama-vm-cdp.dts
ARM: dts: qcom: Adding board support for CDP,MTP,QRD for Kalama VM
2021-10-29 22:43:49 -07:00
kalama-vm-cdp.dtsi
ARM: dts: msm: add TUI support on secondary touch
2022-08-02 14:59:24 -07:00
kalama-vm-dma-heaps.dtsi
ARM: dts: msm: Use TUI_CARVEOUT_HEAP on kalama-vm
2022-06-29 16:59:01 -07:00
kalama-vm-mtp.dts
ARM: dts: qcom: Adding board support for CDP,MTP,QRD for Kalama VM
2021-10-29 22:43:49 -07:00
kalama-vm-mtp.dtsi
ARM: dts: msm: add trusted touch properties for kalama
2022-03-30 19:11:15 -07:00
kalama-vm-qrd.dts
ARM: dts: qcom: Adding board support for CDP,MTP,QRD for Kalama VM
2021-10-29 22:43:49 -07:00
kalama-vm-qrd.dtsi
ARM: dts: msm: add trusted support for QRD on kalama
2022-05-02 17:53:50 -07:00
kalama-vm-rumi.dts
ARM: dts: msm: Adding base vm dt for kalama and support for rumi platform
2021-10-22 09:35:54 +05:30
kalama-vm-rumi.dtsi
ARM: dts: msm: Adding base vm dt for kalama and support for rumi platform
2021-10-22 09:35:54 +05:30
kalama-vm.dtsi
ARM: dts: msm: Add encrypt alive log support
2022-09-04 20:14:12 -07:00
kalama.dts
ARM: dts: msm: Add initial device tree for kalama
2021-06-01 22:52:08 -07:00
kalama.dtsi
Merge "ARM: dts: msm: Remove bootloader-managed regions from Kalama memory map"
2022-10-18 12:50:52 -07:00
kalamap-hdk-overlay.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalamap-hdk.dtsi
ARM: dts: msm: Add gpio as fixed regulator to power on NVMe
2022-09-12 11:31:55 +05:30
kalamap-oemvm-hdk.dts
ARM: dts: msm: Add device trees for KalamaP HDK
2022-07-11 11:15:21 +08:00
kalamap-oemvm-hdk.dtsi
ARM: dts: msm: Add device trees for KalamaP HDK
2022-07-11 11:15:21 +08:00
kalamap-oemvm-hhg.dts
ARM: dts: msm: Add device trees for KalamaP HHG
2022-07-20 13:30:06 +08:00
kalamap-oemvm-hhg.dtsi
ARM: dts: msm: Add device trees for KalamaP HHG
2022-07-20 13:30:06 +08:00
kalamap-oemvm.dtsi
ARM: dts: msm: Add device trees for KalamaP HDK
2022-07-11 11:15:21 +08:00
kalamap-sg-hhg-overlay.dts
ARM: dts: msm: Add device tree support for Kalamap SG SoC Variants
2022-08-26 12:13:15 +08:00
kalamap-sg-hhg.dtsi
ARM: dts: msm: Add gpio as fixed regulator to power on NVMe
2022-09-12 11:31:55 +05:30
kalamap-sg.dts
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalamap-sg.dtsi
ARM: dts: msm: Add device tree support for Kalama SG SoC Variants
2022-08-18 10:02:07 -07:00
kalamap-v2.dts
ARM: dts: msm: Add support for Kalama v2
2022-01-21 11:41:07 -08:00
kalamap-v2.dtsi
ARM: dts: msm: Fix the kalamap dtsi files
2022-07-26 14:06:47 -07:00
kalamap-vm-hdk.dts
ARM: dts: msm: Add device trees for KalamaP HDK
2022-07-11 11:15:21 +08:00
kalamap-vm-hdk.dtsi
ARM: dts: msm: Add device trees for KalamaP HDK
2022-07-11 11:15:21 +08:00
kalamap-vm-hhg.dts
ARM: dts: msm: Add device trees for KalamaP HHG
2022-07-20 13:30:06 +08:00
kalamap-vm-hhg.dtsi
ARM: dts: msm: Add device trees for KalamaP HHG
2022-07-20 13:30:06 +08:00
kalamap-vm.dtsi
ARM: dts: msm: Add device trees for KalamaP HDK
2022-07-11 11:15:21 +08:00
kalamap.dts
ARM: dts: msm: Add device trees for KalamaP SoC
2021-09-15 11:52:10 -07:00
kalamap.dtsi
ARM: dts: msm: Fix the kalamap dtsi files
2022-07-26 14:06:47 -07:00
khaje-atp-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-atp.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-atp.dtsi
ARM: dts: msm: Modify adc_tm nodes for Khaje to suit spmi adc tm5 driver
2022-10-03 21:28:24 +05:30
khaje-dma-heaps.dtsi
ARM: dts: msm: add display heap region for Khaje
2022-09-26 17:34:50 +05:30
khaje-idp-nopmi-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-idp-nopmi.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp-nopmi.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-idp-pm7250b.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
khaje-idp-pm8010-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-idp-pm8010.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khaje-idp-usbc-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-idp-usbc.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-idp.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idp.dtsi
ARM: dts: msm: Modify adc_tm nodes for Khaje to suit spmi adc tm5 driver
2022-10-03 21:28:24 +05:30
khaje-idps-display-90hz-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-idps-display-90hz.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-idps-display-90hz.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-pinctrl.dtsi
ARM: dts: msm: Update MPM irqchip device for khaje
2022-08-30 22:04:32 +05:30
khaje-pm7250b.dtsi
ARM: dts: msm: Modify adc_tm nodes for Khaje to suit spmi adc tm5 driver
2022-10-03 21:28:24 +05:30
khaje-qrd-hvdcp3p5-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-qrd-hvdcp3p5.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-hvdcp3p5.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nopmi-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-qrd-nopmi.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nopmi.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nowcd9375-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-qrd-nowcd9375.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-nowcd9375.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd-overlay.dts
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khaje-qrd-pm7250b.dtsi
ARM: dts: qcom: Enable userspace cpu and gpu cooling devices for khaje
2022-09-11 23:33:11 -07:00
khaje-qrd.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-qrd.dtsi
ARM: dts: qcom: Enable quiet-therm thermalzone for khaje
2022-10-12 05:09:00 -07:00
khaje-regulator.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje-thermal-pm7250b-overlay.dtsi
ARM: dts: qcom: Enable userspace cpu and gpu cooling devices for khaje
2022-09-11 23:33:11 -07:00
khaje-usb.dtsi
ARM: dts: msm: Add interconnect property for Khaje
2022-09-20 03:08:45 -07:00
khaje.dts
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
khaje.dtsi
ARM: dts: qcom: Add device tree support for Khaje IOT
2022-10-14 13:45:08 +05:30
khajeg-atp-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-atp.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-atp.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-nopmi-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-nopmi.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-nopmi.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-pm8010-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-pm8010.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-pm8010.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-usbc-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp-usbc.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idp.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idps-display-90hz-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idps-display-90hz.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-idps-display-90hz.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-hvdcp3p5-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-hvdcp3p5.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-hvdcp3p5.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-nopmi-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-nopmi.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-nopmi.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-nowcd9375-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-nowcd9375.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-nowcd9375.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd-overlay.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg-qrd.dtsi
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg.dts
ARM: dts: qcom: Add apq-gaming variant device tree support to Khaje
2022-09-01 20:58:30 -07:00
khajeg.dtsi
ARM: dts: msm: Disable ipa for wlan side for khaje
2022-10-04 02:36:47 -07:00
khajep-atp-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-atp.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-atp.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-nopmi-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-nopmi.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-nopmi.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-pm8010-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-pm8010.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-pm8010.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-usbc-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp-usbc.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idp.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idps-display-90hz-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idps-display-90hz.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-idps-display-90hz.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-hvdcp3p5-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-hvdcp3p5.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-hvdcp3p5.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-nopmi-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-nopmi.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-nopmi.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-nowcd9375-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-nowcd9375.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-nowcd9375.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep-qrd.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajep.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-atp-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-atp.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-atp.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-nopmi-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-nopmi.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-nopmi.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-pm8010-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-pm8010.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-pm8010.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-usbc-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp-usbc.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idp.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idps-display-90hz-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idps-display-90hz.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-idps-display-90hz.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-hvdcp3p5-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-hvdcp3p5.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-hvdcp3p5.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-nopmi-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-nopmi.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-nopmi.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-nowcd9375-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-nowcd9375.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-nowcd9375.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd-overlay.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq-qrd.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq.dts
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
khajeq.dtsi
ARM: dts: msm: Add initial device tree for khajep/q
2022-08-31 23:14:34 -07:00
lemans-3pmic-regulators.dtsi
ARM: dts: qcom: Add RPMh controlled PMIC regulators for Lemans
2022-09-01 10:49:37 +05:30
lemans-4pmic-regulators.dtsi
ARM: dts: qcom: Add RPMh controlled PMIC regulators for Lemans
2022-09-01 10:49:37 +05:30
lemans-adas-high-adp-air-overlay.dts
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-adas-high-adp-star-overlay.dts
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-adas-high.dts
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-adas-high.dtsi
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-adp-air.dtsi
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-adp-common.dtsi
ARM: dts: msm: add SPMI PMIC arbiter and PMIC devices for lemans
2022-10-07 16:00:45 +05:30
lemans-adp-star.dtsi
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-debug.dtsi
ARM: dts: msm: Add memory dump nodes for Lemans
2022-09-19 11:45:23 +05:30
lemans-dma-heaps.dtsi
ARM: dts: msm: Add the dma-buf heaps device node for Lemans
2022-10-14 02:11:22 +05:30
lemans-gdsc.dtsi
ARM: dts: msm: Add clock controllers and gdscs for lemans
2022-09-09 02:40:00 -07:00
lemans-ivi-adp-air-overlay.dts
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-ivi-adp-star-overlay.dts
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-ivi.dts
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-ivi.dtsi
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-pcie.dtsi
ARM: dts: msm: Add PCIe devicetree nodes for Lemans
2022-10-17 13:34:29 +05:30
lemans-pinctrl.dtsi
ARM: dts: msm: Add PCIe devicetree nodes for Lemans
2022-10-17 13:34:29 +05:30
lemans-pmic-overlay.dtsi
ARM: dts: msm: add SPMI PMIC arbiter and PMIC devices for lemans
2022-10-07 16:00:45 +05:30
lemans-qupv3.dtsi
ARM: dts: msm: Add QUPv3 node for Lemans target
2022-09-29 12:25:31 +05:30
lemans-rumi-overlay.dts
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans-rumi.dtsi
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans.dts
ARM: dts: msm: Add initial device tree for Lemans
2022-07-25 12:56:38 +05:30
lemans.dtsi
ARM: dts: msm: Add PCIe devicetree nodes for Lemans
2022-10-17 13:34:29 +05:30
Makefile
Merge "ARM: dts: msm: Add DT overlay support for sa410m"
2022-10-18 12:50:52 -07:00
monaco-atp-v1-overlay.dts
ARM: dts: msm: Add wdp and atp variants for monaco
2022-09-27 04:22:11 -07:00
monaco-atp-v1.dtsi
ARM: dts: msm: Add wdp and atp variants for monaco
2022-09-27 04:22:11 -07:00
monaco-coresight.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-dma-heaps.dtsi
ARM: dts: msm: Remove secure-display dmabuf heap for monaco
2022-08-22 12:34:11 +05:30
monaco-gdsc.dtsi
ARM: dts: msm: Add support for real GDSC's for SA410M
2022-09-23 00:06:51 -07:00
monaco-haptics-fifo-data.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-idp-v1-common.dtsi
ARM: dts: msm: Move sdhc1 node to common idp file for monaco variants
2022-10-12 11:22:23 +05:30
monaco-idp-v1-overlay.dts
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-idp-v1.dtsi
ARM: dts: msm: Move sdhc1 node to common idp file for monaco variants
2022-10-12 11:22:23 +05:30
monaco-idp-v2-overlay.dts
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-idp-v2.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-idp-v3-overlay.dts
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-idp-v3.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-pinctrl.dtsi
ARM: dts: msm: Update MPM irqchip device for monaco
2022-09-26 11:30:09 +05:30
monaco-pmic.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-qupv3.dtsi
ARM: dts: msm: Add QUPv3 DT nodes in Monaco
2022-09-01 21:44:51 -07:00
monaco-regulators.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco-standalone-atp-v1-overlay.dts
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-atp-v1.dtsi
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-idp-v1-overlay.dts
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-idp-v1.dtsi
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-idp-v2-overlay.dts
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-idp-v2.dtsi
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-idp-v3-overlay.dts
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-idp-v3.dtsi
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-wdp-v1-overlay.dts
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-standalone-wdp-v1.dtsi
ARM: dts: msm: Add standalone base dt support for monaco
2022-10-11 18:15:14 +05:30
monaco-thermal-overlay.dtsi
ARM: dts: msm: Add thermal, tsens, bcl devicetree for monaco
2022-10-11 21:52:39 -07:00
monaco-thermal.dtsi
ARM: dts: msm: Add thermal, tsens, bcl devicetree for monaco
2022-10-11 21:52:39 -07:00
monaco-usb.dtsi
ARM: dts: msm: Add changes for USB enablement on monaco
2022-08-26 19:06:49 +05:30
monaco-wdp-v1-overlay.dts
ARM: dts: msm: Add wdp and atp variants for monaco
2022-09-27 04:22:11 -07:00
monaco-wdp-v1.dtsi
ARM: dts: msm: Add wdp and atp variants for monaco
2022-09-27 04:22:11 -07:00
monaco.dts
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monaco.dtsi
Merge "ARM: dts: msm: update interrupt names for adsp and mdsp"
2022-10-17 03:35:40 -07:00
monacop.dts
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
monacop.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
msm-arm-smmu-bengal.dtsi
ARM: dts: msm: Add interconnect property for Khaje
2022-09-20 03:08:45 -07:00
msm-arm-smmu-cinder.dtsi
ARM: dts: msm: Disable micro-idle on cinder
2022-05-25 19:52:13 -07:00
msm-arm-smmu-kalama-vm.dtsi
ARM: dts: msm: Update the ACTLR settings for Kalama's VM's IOMMU clients
2022-01-04 15:52:47 -08:00
msm-arm-smmu-kalama.dtsi
ARM: dts: msm: Add handoff-smr for cont splash
2022-02-18 10:11:52 +05:30
msm-arm-smmu-lemans.dtsi
ARM: dts: msm: Add the PCIe SMMUv2 instance for Lemans
2022-10-11 09:21:32 +05:30
msm-arm-smmu-monaco.dtsi
ARM: dts: msm: Remove AHB clock for monaco
2022-10-07 14:33:00 +05:30
msm-arm-smmu-sa410m.dtsi
ARM: dts: msm: Add smmu dt nodes for sa410m
2022-09-14 06:01:17 -07:00
msm-arm-smmu-scuba_auto.dtsi
ARM: dts: msm: Add smmu dt nodes for scuba_auto
2022-09-07 21:28:37 -07:00
msm-arm-smmu-sdmshrike.dtsi
ARM: dts: msm: Add ARM SMMU devices for SDMSHRIKE
2022-06-22 09:17:54 +05:30
msm-arm-smmu-sdxbaagha.dtsi
ARM: dts: msm: Add initial smmu dt for sdxbaagha
2022-07-21 20:56:38 -07:00
msm-arm-smmu-sdxpinn.dtsi
ARM: dts: msm: Add initial smmu configuration for sdxpinn
2022-08-09 10:35:15 +05:30
msm-arm-smmu-sm8150-v2.dtsi
ARM: dts: msm: Add compatible string for kgsl_smmu
2022-09-30 15:33:09 +05:30
msm-arm-smmu-sm8150.dtsi
ARM: dts: msm: Add ARM SMMU devices for SM8150
2022-03-22 12:08:07 +05:30
msm-arm-smmu-waipio-vm.dtsi
ARM: dts: msm: remove execute permissions for dt files
2021-08-23 11:07:07 -07:00
msm-arm-smmu-waipio.dtsi
ARM: dts: msm: Remove SMR and CB override values for Waipio's IOMMUs
2021-12-28 13:03:30 -08:00
msm-rdbg-monaco.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
msm-rdbg.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm2250-rpm-regulator.dtsi
ARM: dts: msm: Add regulators for SCUBA
2022-08-18 14:31:09 +05:30
pm5100-rpm-regulator.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
pm5100.dtsi
ARM: dts: msm: Add thermal, tsens, bcl devicetree for monaco
2022-10-11 21:52:39 -07:00
pm6125-rpm-regulator.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
pm6125.dtsi
ARM: dts: msm: Update power-on node for pm6125
2022-10-07 06:31:59 -07:00
pm7250b.dtsi
ARM: dts: msm: Modify adc_tm nodes for Khaje to suit spmi adc tm5 driver
2022-10-03 21:28:24 +05:30
pm7550ba.dtsi
ARM: dts: qcom: add PM7550BA PMIC devices
2022-07-12 17:34:33 -07:00
pm8008.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
pm8010-rpm-regulator.dtsi
ARM: dts: msm: Add initial device tree for monaco
2022-07-08 20:15:48 +05:30
pm8150-vm.dtsi
ARM: dts: msm: Add virtual spmi device tree node for autogvm
2022-10-11 14:33:44 +08:00
pm8150.dtsi
ARM: dts: msm: rename property disable-alarm-wakeup
2022-09-09 21:41:15 +05:30
pm8195.dtsi
ARM: dts: msm: Enable reboot modes for PM8195
2022-09-20 15:03:33 +05:30
pm8350.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm8350b.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm8350c.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm8450.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pm8550.dtsi
ARM: dts: qcom: Update trip point 1 setting for Kalama PMICs
2022-08-16 15:54:04 -07:00
pm8550b.dtsi
ARM: dts: qcom: Update trip point 1 setting for Kalama PMICs
2022-08-16 15:54:04 -07:00
pm8550ve.dtsi
ARM: dts: qcom: Update trip point 1 setting for Kalama PMICs
2022-08-16 15:54:04 -07:00
pm8550vs.dtsi
ARM: dts: qcom: Update trip point 1 setting for Kalama PMICs
2022-08-16 15:54:04 -07:00
pm8775.dtsi
ARM: dts: msm: add SPMI PMIC arbiter and PMIC devices for lemans
2022-10-07 16:00:45 +05:30
pmk8350.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pmk8550.dtsi
ARM: dts: msm: add regulator OCP notifier device for Kalama
2022-04-15 17:45:34 -07:00
pmr735a.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pmr735b.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
pmr735d.dtsi
ARM: dts: qcom: Update trip point 1 setting for Kalama PMICs
2022-08-16 15:54:04 -07:00
pmx35.dtsi
ARM: dts: msm: Add PMX35 PMIC devices
2022-10-14 15:17:50 +05:30
pmx75.dtsi
ARM: dts: qcom: add PMX75 PMIC devices
2022-07-12 17:34:23 -07:00
qg-batterydata-alium-3600mah.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
qg-batterydata-atl466271_3300mAh.dtsi
ARM: dts: msm: Add initial device tree for khaje
2022-05-19 14:00:55 +05:30
quin-vm-common.dtsi
Merge "ARM: dts: qcom: Add virtio_regulator node for autogvm"
2022-10-17 03:35:40 -07:00
sa410m-dma-heap.dtsi
ARM: dts: msm: Add the dma-buf heaps device node for sa410m
2022-10-10 00:27:14 -07:00
sa410m-emmc-ccard-overlay.dts
ARM: dts: msm: Add DT overlay support for sa410m
2022-10-17 21:44:12 -07:00
sa410m-emmc-idp-overlay.dts
ARM: dts: msm: Add DT overlay support for sa410m
2022-10-17 21:44:12 -07:00
sa410m-idp.dtsi
ARM: dts: msm: Add DT overlay support for sa410m
2022-10-17 21:44:12 -07:00
sa410m-nand-ccard-overlay.dts
ARM: dts: msm: Add DT overlay support for sa410m
2022-10-17 21:44:12 -07:00
sa410m-nand-idp-overlay.dts
ARM: dts: msm: Add DT overlay support for sa410m
2022-10-17 21:44:12 -07:00
sa410m-pinctrl.dtsi
ARM: dts: msm: Enable support for sdcc1 on sa410
2022-10-16 18:01:23 +05:30
sa410m-qupv3.dtsi
ARM: dts: msm: Add pinctrl node for UART
2022-10-03 08:00:21 +05:30
sa410m-rumi-overlay.dts
ARM: dts: msm: Add DT overlay support for sa410m
2022-10-17 21:44:12 -07:00
sa410m-rumi.dtsi
ARM: dts: msm: Add DT overlay support for sa410m
2022-10-17 21:44:12 -07:00
sa410m-stub-regulators.dtsi
ARM: dts: msm: Add stub regulators for sa410m
2022-07-18 01:21:01 -07:00
sa410m.dts
ARM: dts: msm: Add DT overlay support for sa410m
2022-10-17 21:44:12 -07:00
sa410m.dtsi
Merge "ARM: dts: msm: Add LPM modes, mpm, rpm_smd and stats nodes for SA410m_auto"
2022-10-18 18:32:49 -07:00
sa525m-rumi.dts
ARM: dts: msm: Add dt for sa525m-rumi
2022-05-26 01:02:31 -07:00
sa525m.dtsi
ARM: dts: msm: Add dt for sa525m-rumi
2022-05-26 01:02:31 -07:00
sa6155-adp-air-overlay.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155-adp-common.dtsi
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155-adp-star-overlay.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155.dtsi
ARM: dts: qcom: Enable thermal zones and cooling devices for sa6155
2022-07-18 17:27:10 +05:30
sa6155p-adp-air-overlay.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155p-adp-star-overlay.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155p.dts
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sa6155p.dtsi
ARM: dts: qcom: Enable thermal zones and cooling devices for sa6155
2022-07-18 17:27:10 +05:30
sa8155-adp-air-overlay.dts
ARM: dts: msm: Add msm-id to SA8155 overlay files
2022-07-19 22:04:03 +05:30
sa8155-adp-common.dtsi
ARM: dts: msm: Enable asm330 sensor for SA8155 target
2022-10-07 09:25:44 +05:30
sa8155-adp-star-overlay.dts
ARM: dts: msm: Add msm-id to SA8155 overlay files
2022-07-19 22:04:03 +05:30
sa8155-adp-star.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155-pmic-overlay.dtsi
ARM: dts: msm: rename property disable-alarm-wakeup
2022-09-09 21:41:15 +05:30
sa8155-regulator.dtsi
ARM: dts: msm: Add regulators for sa8155
2022-02-02 17:52:27 +05:30
sa8155-v1.dtsi
ARM: dts: msm: Add clock controller and gdsc nodes for sm8150
2022-03-08 09:27:33 +05:30
sa8155-v2.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155-v2.dtsi
ARM: dts: msm: Add PCIe configuration for SM8150
2022-03-24 21:54:17 +05:30
sa8155-vm-la-overlay.dts
ARM: dts: msm: update overlay for sa8155-vm
2022-10-13 22:12:00 -07:00
sa8155-vm-la.dts
ARM: dts: msm: Add initial device tree for an SA8155 based Auto VM
2022-07-11 21:59:33 -07:00
sa8155-vm-la.dtsi
ARM: dts: msm: Add support for QSEECom, TA, and Secure Display DMA Heaps
2022-08-29 21:56:54 -07:00
sa8155-vm.dtsi
ARM: dts: msm: Remove two HAB channels for Auto Gen3 GVMs
2022-10-18 15:09:48 +08:00
sa8155.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155.dtsi
ARM: dts: msm: disable ethernet on SA8155
2022-10-14 23:29:30 +05:30
sa8155p-adp-air-overlay.dts
ARM: dts: msm: Add msm-id to SA8155 overlay files
2022-07-19 22:04:03 +05:30
sa8155p-adp-star-overlay.dts
ARM: dts: msm: Add msm-id to SA8155 overlay files
2022-07-19 22:04:03 +05:30
sa8155p-v2.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155p-v2.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155p.dts
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8155p.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sa8195-gdsc.dtsi
ARM: dts: msm: Add all clock controller and gdsc nodes for sc8180x
2022-06-21 11:44:24 +05:30
sa8195-pmic.dtsi
ARM: dts: msm: rename property disable-alarm-wakeup
2022-09-09 21:41:15 +05:30
sa8195-qupv3.dtsi
ARM: dts: msm: Add QUP node for SA8195 target
2022-07-22 15:39:12 +05:30
sa8195-regulator.dtsi
ARM: dts: msm: Add regulators for SDMSHRIKE
2022-05-23 07:33:30 +05:30
sa8195-ssc-qupv3.dtsi
ARM: dts: msm: Add QUP node for SA8195 target
2022-07-22 15:39:12 +05:30
sa8195-thermal.dtsi
ARM: dts: qcom: Enable thermal zones and cooling devices for sa8195
2022-07-12 11:06:45 +05:30
sa8195-usb.dtsi
ARM: dts: msm: Add support for both primary and secondary ports on SA8195
2022-09-12 11:16:26 +05:30
sa8195p-adp-air-overlay.dts
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-adp-air.dtsi
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-adp-common.dtsi
ARM: dts: msm: Fix overlay issue for SA8195P
2022-08-01 12:07:07 +05:30
sa8195p-adp-star-overlay.dts
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-adp-star.dtsi
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p-pcie.dtsi
ARM: dts: msm: update bw-scale DT property for gen3 targets
2022-09-07 19:18:37 +05:30
sa8195p-regulator.dtsi
ARM: dts: msm: Update protected-clocks and compatible string for SC8180X
2022-06-24 10:01:11 +05:30
sa8195p.dts
ARM: dts: msm: Add skeleton for all SA8195 DT files
2022-01-19 23:21:33 +05:30
sa8195p.dtsi
Merge "ARM: dts: msm: Disable lpm mode for UFS"
2022-10-05 22:59:42 -07:00
scuba_auto-dma-heap.dtsi
ARM: dts: msm: Add the dma-buf heaps device node for scuba_auto
2022-10-10 00:29:18 -07:00
scuba_auto-idp-overlay.dts
ARM: dts: msm: Enable DT overlay support for scuba auto
2022-09-29 09:07:24 -07:00
scuba_auto-idp.dtsi
ARM: dts: msm: Add clock controller nodes for SCUBA
2022-08-22 17:02:22 +05:30
scuba_auto-pinctrl.dtsi
ARM: dts: msm: Add SDHC, QUP, RMTFS and MPROC nodes in scuba_auto
2022-09-13 05:39:15 -07:00
scuba_auto-qrd-overlay.dts
ARM: dts: msm: Enable DT overlay support for scuba auto
2022-09-29 09:07:24 -07:00
scuba_auto-qrd.dtsi
ARM: dts: msm: Add initial device tree for scuba_auto target
2022-07-19 00:31:52 -07:00
scuba_auto-qupv3.dtsi
ARM: dts: msm: Add SDHC, QUP, RMTFS and MPROC nodes in scuba_auto
2022-09-13 05:39:15 -07:00
scuba_auto.dts
ARM: dts: msm: Enable DT overlay support for scuba auto
2022-09-29 09:07:24 -07:00
scuba_auto.dtsi
ARM: dts: msm: Add reserved mem node for sa410m and scuba-auto
2022-10-14 11:06:58 -07:00
scuba-regulator.dtsi
ARM: dts: msm: Add regulators for SCUBA
2022-08-18 14:31:09 +05:30
scuba-thermal.dtsi
ARM: dts: qcom: Add thermal devicetree support for sa410m
2022-08-19 02:19:17 -07:00
sdmshrike-debug.dtsi
ARM: dts: msm: Add memory dump nodes for SDMSHRIKE
2022-06-24 11:25:32 +05:30
sdmshrike-dma-heaps.dtsi
ARM: dts: msm: Add the dma-buf heaps device node for SDMSHRIKE
2022-06-22 09:19:09 +05:30
sdmshrike-pinctrl.dtsi
ARM: dts: msm: Add QUP node for SA8195 target
2022-07-22 15:39:12 +05:30
sdmshrike-v2.dtsi
ARM: dts: msm: Add all clock controller and gdsc nodes for sc8180x
2022-06-21 11:44:24 +05:30
sdmshrike.dtsi
Merge "ARM: dts: msm: Add ddr-regions node to sdmshrike for optimise"
2022-10-01 16:31:02 -07:00
sdxbaagha-cdp.dts
ARM: dts: msm: Add initial devicetrees for sdxbaagha target
2022-07-15 17:07:12 +08:00
sdxbaagha-cdp.dtsi
ARM: dts: msm: Add initial devicetrees for sdxbaagha target
2022-07-15 17:07:12 +08:00
sdxbaagha-dma-heaps.dtsi
ARM: dts: msm: Add dma-buf heaps for sdxbaagha
2022-07-20 20:51:52 -07:00
sdxbaagha-mtp.dts
ARM: dts: msm: Add initial devicetrees for sdxbaagha target
2022-07-15 17:07:12 +08:00
sdxbaagha-mtp.dtsi
ARM: dts: msm: Add initial devicetrees for sdxbaagha target
2022-07-15 17:07:12 +08:00
sdxbaagha-pcie.dtsi
ARM: dts: msm: Add PCIe configuration for sdxbaagha
2022-09-14 12:06:31 +05:30
sdxbaagha-pinctrl.dtsi
ARM: dts: msm: Add RSC and PDC devices for sdxbaagha
2022-10-11 10:24:37 +05:30
sdxbaagha-qupv3.dtsi
ARM: dts: msm: Add QUPv3 UART console node for sdxbaagha
2022-08-17 00:49:40 -07:00
sdxbaagha-rumi.dts
ARM: dts: msm: Update the subtype with ddr info
2022-10-10 11:23:47 +08:00
sdxbaagha-rumi.dtsi
ARM: dts: msm: Add usb device nodes for sdxbaagha
2022-10-07 21:21:52 +05:30
sdxbaagha-stub-regulator.dtsi
ARM: dts: msm: Add stub regulators for sdxbaagha
2022-07-18 14:58:48 +05:30
sdxbaagha-usb.dtsi
ARM: dts: msm: Add usb device nodes for sdxbaagha
2022-10-07 21:21:52 +05:30
sdxbaagha.dtsi
ARM: dts: msm: Add compatible property for apps_rsc device for sdxbaagha
2022-10-17 11:00:58 +05:30
sdxlemur-external-soc.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
sdxpinn-coresight.dtsi
ARM: dts: msm: revise cmb elememt size on sdxpinn
2022-09-29 22:38:49 -07:00
sdxpinn-debug.dtsi
ARM: dts: msm: add etr1_reg dump entry on sdxpinn
2022-09-26 17:08:08 +08:00
sdxpinn-dma-heaps.dtsi
ARM: dts: msm: Add initial dmabuf heaps for sdxpinn
2022-08-08 22:12:43 -07:00
sdxpinn-external-soc.dtsi
ARM: dts: msm: Add initial support for kalama+sdxpinn
2022-09-19 13:35:56 +08:00
sdxpinn-idp-mbb.dts
ARM: dts: qcom: Add additional board files for sdxpinn
2022-08-18 21:41:01 -07:00
sdxpinn-idp-mbb.dtsi
ARM: dts: qcom: Add additional board files for sdxpinn
2022-08-18 21:41:01 -07:00
sdxpinn-pcie.dtsi
ARM: dts: msm: Add PCIe PHY settings for sdxpinn
2022-10-03 16:54:14 +05:30
sdxpinn-pinctrl.dtsi
ARM: dts: msm: Add QUPV3 SE dtsi entries for sdxpinn
2022-10-02 10:24:01 +05:30
sdxpinn-pmic-overlay.dtsi
ARM: dts: msm: Add PMIC thermal-zones for sdxpinn
2022-08-29 12:30:16 -07:00
sdxpinn-qupv3.dtsi
ARM: dts: msm: Add QUPV3 SE dtsi entries for sdxpinn
2022-10-02 10:24:01 +05:30
sdxpinn-regulators.dtsi
ARM: dts: qcom: add stub regulator devices for sdxpinn
2022-05-17 14:55:50 -07:00
sdxpinn-reserved-memory.dtsi
ARM: dts: msm: Updated memory map for sdxpinn
2022-09-12 06:32:20 -07:00
sdxpinn-rumi.dts
ARM: dts: qcom: Update the ddr size in dts
2022-09-20 06:02:23 -07:00
sdxpinn-rumi.dtsi
ARM: dts: msm: Update RPMHCC node for sdxpinn
2022-09-30 02:56:17 -07:00
sdxpinn-thermal-modem.dtsi
ARM: dts: qcom: Enable tsens thermal zone and cooling devices for sdxpinn
2022-09-20 03:57:25 -07:00
sdxpinn-thermal.dtsi
ARM: dts: qcom: Enable tsens thermal zone and cooling devices for sdxpinn
2022-09-20 03:57:25 -07:00
sdxpinn-usb.dtsi
ARM: dts: msm: Add USB related dt entries for sdxpinn
2022-08-15 23:56:42 -07:00
sdxpinn.dts
ARM: dts: msm: Add initial device tree for sdxpinn target
2022-05-17 15:38:53 +05:30
sdxpinn.dtsi
ARM: dts: msm: Add smmu and bus voting support for sdxpinn nand
2022-10-11 01:39:15 -07:00
slate.dtsi
ARM: dts: qcom: Add spi node for AON interface
2022-10-03 11:56:40 +05:30
sm6150-pinctrl.dtsi
ARM: dts: msm: Add pinctrl for TLMM on SM6150
2022-03-31 02:09:25 -07:00
sm6150-thermal.dtsi
ARM: dts: qcom: Enable thermal zones and cooling devices for sa6155
2022-07-18 17:27:10 +05:30
sm6150.dtsi
ARM: dts: qcom: Enable thermal zones and cooling devices for sa6155
2022-07-18 17:27:10 +05:30
sm6150p.dtsi
ARM: dts: msm: Add skeleton for all SM6150 and SA6155 DT files
2022-03-31 14:38:49 +05:30
sm8150-debug.dtsi
ARM: dts: msm: Add DCC V2 device tree entry for sm8150
2022-06-27 15:02:44 +05:30
sm8150-dma-heaps.dtsi
ARM: dts: msm: Add the dma-buf heaps device node for sm8150
2022-02-16 23:44:43 -08:00
sm8150-gdsc.dtsi
ARM: dts: msm: Add clock controller and gdsc nodes for sm8150
2022-03-08 09:27:33 +05:30
sm8150-pcie.dtsi
ARM: dts: msm: update bw-scale DT property for gen3 targets
2022-09-07 19:18:37 +05:30
sm8150-pinctrl.dtsi
ARM: dts: msm: Add pinctrl property for 4W UART node
2022-06-02 14:32:34 +05:30
sm8150-qupv3.dtsi
ARM: dts: msm: Add pinctrl property for 4W UART node
2022-06-02 14:32:34 +05:30
sm8150-regulator.dtsi
ARM: dts: msm: Add regulators for sa8155
2022-02-02 17:52:27 +05:30
sm8150-slpi-pinctrl.dtsi
ARM: dts: msm: Add SLPI pinctrl for SM8150
2022-04-05 01:26:46 -07:00
sm8150-smp2p.dtsi
ARM: dts: msm: Add Mproc nodes support on SM8150
2022-03-24 05:13:23 -07:00
sm8150-ssc-qupv3.dtsi
ARM: dts: msm: Add QUP node entries for SM8150
2022-04-06 23:05:50 -07:00
sm8150-thermal.dtsi
ARM: dts: qcom: Enable thermal zones and cooling devices for sa8155
2022-07-11 12:00:55 +05:30
sm8150-usb.dtsi
ARM: dts: msm: Remove delay from QMP phy init sequence
2022-08-10 15:14:21 -07:00
sm8150-v2.dtsi
ARM: dts: msm: Add PCIe configuration for SM8150
2022-03-24 21:54:17 +05:30
sm8150.dtsi
ARM: dts: msm: Add ddr-regions node for optimise
2022-09-29 21:38:29 -07:00
sm8150p-v2.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
sm8150p.dtsi
ARM: dts: msm: Add skeleton for all SM8150 and SA8155 DT files
2022-01-13 07:44:10 +05:30
smb1355.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
smb1394.dtsi
ARM: dts: msm: Add changes for PMIC and USB driver probes
2022-06-29 02:42:37 -07:00
waipio-atp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-atp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-atp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-atp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-atp.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-cdp.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-coresight.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-debug.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-dma-heaps.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-eva.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-gpu.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-hdk.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-kiwi-mtp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-kiwi-mtp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur-cdp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur-cdp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur-mtp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur-mtp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-lemur.dtsi
ARM: dts: msm: Add gen speed mismatch panic boolean for waipio-lemur
2022-03-23 11:43:35 -07:00
waipio-mtp-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-mtp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-mtp-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-mtp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-mtp.dtsi
ARM: dts: msm: Remove ucsi port related remote-endpoint with USB on waipio
2021-08-30 14:51:43 -07:00
waipio-oemvm-cdp.dts
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-cdp.dtsi
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-mtp.dts
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-mtp.dtsi
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-qrd.dts
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-qrd.dtsi
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-rumi.dts
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm-rumi.dtsi
ARM: dts: qcom: Add oemvm support to Waipio Kernel Platform
2022-02-02 08:32:15 +05:30
waipio-oemvm.dtsi
ARM: dts: qcom: Add disk emulation support for kalama and WKP
2022-02-03 21:29:48 -08:00
waipio-pcie.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-pinctrl.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-pm8008.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-pm8010-i2c.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-pm8010-spmi.dtsi
ARM: dts: msm: Update apps and display RSC to support multi DRV for waipio
2021-11-15 13:02:20 +05:30
waipio-pmic-overlay.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-2s.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8008-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8010-2s-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8010-2s.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qrd.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-qupv3.dtsi
ARM: dts: msm: Enable QUPv3 console node for upstream driver
2021-08-26 10:50:15 +05:30
waipio-regulators.dtsi
ARM: dts: msm: Update apps and display RSC to support multi DRV for waipio
2021-11-15 13:02:20 +05:30
waipio-rumi-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-rumi.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-rumi.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-smp2p.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-thermal-modem.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-thermal-overlay.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-thermal.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-usb.dtsi
ARM: dts: msm: Remove delay from QMP phy init sequence
2022-08-10 15:14:21 -07:00
waipio-v2-atp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-atp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-cdp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-cdp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-gpu.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-mtp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-mtp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-qrd-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-qrd-pm8010-2s.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2-qrd-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-v2.dtsi
ARM: dts: msm: Update wkp memlat device nodes
2021-12-15 09:27:49 -08:00
waipio-vm-cdp.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-cdp.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-dma-heaps.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-mtp.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-mtp.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-qrd.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-qrd.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-rumi.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm-rumi.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio-vm.dtsi
ARM: dts: qcom: Add persist disk support
2022-03-01 07:04:57 +05:30
waipio.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipio.dtsi
ARM: dts: qcom: Add persist disk support
2022-03-01 07:04:57 +05:30
waipiop-cdp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-cdp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-hdk-pm8010-overlay.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-hdk-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-mtp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-mtp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-qrd-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-qrd-pm8010-2s.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-qrd-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-cdp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-cdp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-hdk-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-mtp-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-mtp-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-qrd-pm8008.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-qrd-pm8010-2s.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2-qrd-pm8010.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop-v2.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop.dts
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00
waipiop.dtsi
ARM: dts: msm: Add devicetree snapshot for Waipio Support
2021-08-20 22:14:14 -07:00